Wolf Tooth Components Giant Cog for SRAM NX Blue 49t
Wolf Tooth Components Giant Cog for SRAM NX Blue, 49t
Wolf Tooth Components Giant Cog for SRAM NX Blue, 49t - This 49-tooth cog is absolutely massive, representing a major increase in low-end for spinning up steep hills and mountains without pooping out halfway up the climb, only for your friends to pass you by. It works flawlessly with sram 11-speed rear derailleurs, as well as shimano 11-speed rear derailleurs with wolf tooth’s separately available wolf cage. Upgrade your sram nx 11-speed cassette with the extra low-end of the wolf tooth components giant cog for sram nx. Not only is it compatible with sram’s pg-1130 cassette from the nx group, but it’s also compatible with 11-speed cassettes from sunrace.

 

Wolf Tooth Components Singletrack Pogie Black and Gray Logo Pair
Wolf Tooth Components Singletrack Pogie: Black and Gray Logo, Pair
Wolf Tooth Components Singletrack Pogie: Black and Gray Logo, Pair - Patent-pending design with three distinct warmth settings warmest (cuff up, zipped up), warmer (cuff up, zipper open), warm or singletrack mode (cuff folded down). Easy hand access. Adjustable cuff allows you to adapt the warmth of the pogie based on the weather conditions and how hard you are working. Velcro, snap, and strap cinch seal around handle bar and cables. Quick install and remove via proprietary quarter turn bar plug mounting system (included).

 

Wolf Tooth Components GCX XX1 Replacement Cog 44T Black
Wolf Tooth Components GCX XX1 Replacement Cog 44T, Black
Wolf Tooth Components GCX XX1 Replacement Cog 44T, Black - Tooth count 44. Gcx cogs replace the largest cog on sram 11-speed xd cassettes for extra durability and to lengthen the cassettes life also offered in a 44t for expanded climbing range. Intended cassette compatibility sram. Not compatible with any other cassettes. Drivetrain speeds 11.

 

Wolf Tooth Components Drop-Stop Elliptical Chainring 40T x 110 BCD Black
Wolf Tooth Components Drop-Stop Elliptical Chainring: 40T x 110 BCD, Black
Wolf Tooth Components Drop-Stop Elliptical Chainring: 40T x 110 BCD, Black - The simplest way to explain the way these rings feel is having 2 teeth less in the weak part of your pedal stroke and 2 teeth more where you have the most power. Features wolf tooth’s drop-stop tooth design for maximum chain retention. Not compatible with 9 speed chains. Ring position/type chain retaining single ring. Optimized for use with 10, 11, and 12 speed chains.

 

Wolf Tooth Components 36t 120bcd Drop-Stop Chainring for SRAM 2x10 Cranks Black
Wolf Tooth Components 36t 120bcd Drop-Stop Chainring for SRAM 2×10 Cranks, Black
Wolf Tooth Components 36t 120bcd Drop-Stop Chainring for SRAM 2×10 Cranks, Black - Optimized for use with 10, 11, and 12 speed chains. This chainring is threaded and requires the stock chainring bolts that came with the crank. Made from 7075 aluminum for durability. Features wolf tooth’s drop-stop tooth design for maximum chain retention. Wolf tooth 6mm and 10mm chainring bolts are not compatible with this ring.

 

Wolf Tooth Components B-RAD 4 Base Mount
Wolf Tooth Components B-RAD 4 Base Mount
Wolf Tooth Components B-RAD 4 Base Mount - Long, four-slotted mount allows two, smaller bottles to be mounted in-line. Compatible with triple bottle mounts on forks or frames, use included neoprene pad and zip tie for use with standard bottle cage mounts. With a variety of fitments, b-rad is all about keeping cargo off the back and onto the bike. B-rad, which stands for bottle relocation and accessory device, is a system for organizing on-bike accessory storage using bottle cage mounts.

 

Wolf Tooth Components Direct-Mount Front Derailleur Cap
Wolf Tooth Components Direct-Mount Front Derailleur Cap
Wolf Tooth Components Direct-Mount Front Derailleur Cap - Installs directly to low direct mount bosses. Install one of these covers to clean up that unslightly mount and add some additional wolf tooth flair to your bike. So you’ve converted to a 1x drivetrain but now you have that direct mount boss looking lonely.

 

Wolf Tooth Components Drop Stop Chainring Blue 32T104 BCD
Wolf Tooth Components Drop Stop Chainring Blue, 32T/104 BCD
Wolf Tooth Components Drop Stop Chainring Blue, 32T/104 BCD - Or even a triple if you’re feeling old school. The drop stop also gives you sizing options. Do you like choices the wolf tooth components drop stop chainring gives you lots of them. You can run the drop stop as a single ring without any kind of chain keeper. It comes in even-numbered teeth from 30 all the way up to 38 and two bcds. You can also run it in a double ring setup. There are even four color choices–black, red, blue, and gold–so you can match it to your current setup or set it apart to emphasize the bling.

 

Wolf Tooth Components Headset Spacer Kit 3 510 15mm Black
Wolf Tooth Components Headset Spacer Kit 3, 5,10, 15mm, Black
Wolf Tooth Components Headset Spacer Kit 3, 5,10, 15mm, Black - H. Material aluminum. I. S. Designed and manufactured in the minneapolis, mn usa. S. Thickness 10. Thickness 3. Stem clamp diameter 28. Fits 1 1/8″ steerers only. Made from 6061-t6 aluminum. Offered in multiple sizes, made proudly in minneapolis, mn, and laser marked with the stack size on each end, find your perfect fit. Defined color black. Thickness 5. Add some color and style to your bike build with precision headset stack spacers. Color black. 6.

 

Wolf Tooth Components Drop-Stop Elliptical Chainring 30T x 64 BCDß
Wolf Tooth Components Drop-Stop Elliptical Chainring: 30T x 64 BCDß
Wolf Tooth Components Drop-Stop Elliptical Chainring: 30T x 64 BCDß - Designed to be used with a 104 bcd alloy bash. Not compatible with 9 speed chains. The simplest way to explain the way these rings feel is having 2 teeth less in the weak part of your pedal stroke and 2 teeth more where you have the most power. Features wolf tooth’s drop-stop tooth design for maximum chain retention. Optimized for use with 10, 11, and 12 speed chains.

 

Wolf Tooth Components Tanpan Inline 11-Speed Conversion
Wolf Tooth Components Tanpan Inline: 11-Speed Conversion
Wolf Tooth Components Tanpan Inline: 11-Speed Conversion - Designed to mount directly to adjuster-free cable stops on shimano rear derailleurs. Certain chainring and cassette configurations benefit from a goatlink. If the rear derailleur cable is routed internally through the chainstay and exits at the end of the chainstay above the axle or past the axle out the very end, you will need to utilize the i. Compatible with most road, cx and gravel bikes. Not compatible with tiagra 4700.

 

Wolf Tooth Components Elliptical Drop-Stop Chainring 30T SRAM Direct Mount 3mm Offset For Boost Chainline Elliptical
Wolf Tooth Components Elliptical Drop-Stop Chainring: 30T, SRAM Direct Mount, 3mm Offset, For Boost Chainline, Elliptical
Wolf Tooth Components Elliptical Drop-Stop Chainring: 30T, SRAM Direct Mount, 3mm Offset, For Boost Chainline, Elliptical - Not compatible with 9 speed chains. The simplest way to explain the way these rings feel is having 2 teeth less in the weak part of your pedal stroke and 2 teeth more where you have the most power. Made from 7075 aluminum for long life. Optimized for use with 10, 11, and 12 speed chains. Direct mount type direct mount sram. Ring position/type chain retaining single ring. Drivetrain speeds 10. Drivetrain speeds 11. Defined color black. Can also be used on long spindled bb30/pf30 cranksets. Round or oval oval. Features wolf tooth’s drop-stop tooth design for maximum chain retention. Designed to fit sram cranksets with removeable spiders. Its proprietary design has an ovality of 10% and a timing of 112 degrees after top dead center which provide the beneifits of an oval ring such as greater rear wheel traction without the traditional downsides of oval rings. Tooth count 30. Material aluminum. Chainline/hub compatibility 141/148 boost hubs. Offset 3. 50mm chainline for optimal rear shifting. Drivetrain speeds 12. Compatible with s2200, s2210, x9,xo,xo1,xx1,x1 1400 cranks.

 

Wolf Tooth Components 42T Drop-Stop Chainring for Shimano Road 110 Asymmetric 4-bolt Cranks Black
Wolf Tooth Components 42T Drop-Stop Chainring: for Shimano Road 110 Asymmetric 4-bolt Cranks Black
Wolf Tooth Components 42T Drop-Stop Chainring: for Shimano Road 110 Asymmetric 4-bolt Cranks Black - Not compatible with 9 speed chains. Defined color black. Drivetrain speeds 12. Color black. Ring position/type chain retaining single ring. Drivetrain speeds 11. These rings feature the patent pending drop-stop asymmetrical tooth design for the best in wear life, mud clearance, and chain retention. Tooth count 42. Optimized for use with 10, 11, and 12 speed chains. Features wolf tooth’s drop-stop tooth design for maximum chain retention. Designed to fit 4-arm 110 asymmetric bcd shimano road cranksets. Chainring bcd 110 shimano asymmetric. Made from 7075 aluminum for long life. Drivetrain speeds 10. Material aluminum.

 

Wolf Tooth Components Headset Spacer Kit 3 510 15mm Green
Wolf Tooth Components Headset Spacer Kit 3, 5,10, 15mm, Green
Wolf Tooth Components Headset Spacer Kit 3, 5,10, 15mm, Green - 6. Defined color green. Add some color and style to your bike build with precision headset stack spacers. Thickness 3. S. Thickness 5. Material aluminum. Thickness 10. Stem clamp diameter 28. S. Color green. Made from 6061-t6 aluminum. Fits 1 1/8″ steerers only. Designed and manufactured in the minneapolis, mn usa. Offered in multiple sizes, made proudly in minneapolis, mn, and laser marked with the stack size on each end, find your perfect fit. H. Thickness 15. I.

 

Wolf Tooth Components Fat Paw Grips Black
Wolf Tooth Components Fat Paw Grips Black
Wolf Tooth Components Fat Paw Grips Black - One of the fattest grips on the market at 36mm outer diameter. Designed for optimal hand comfort and vibration damping. Super-tacky texture designed for use with or without gloves. With its 36mm diameter grip, the fat paw is made from soft durometer silicone to limit hand fatigue, work great with or without gloves and provide exceptional vibration damping.

 

Wolf Tooth Components Lindarets GoatLink Shimano Direct Mount Rear Derailleur
Wolf Tooth Components Lindarets GoatLink Shimano Direct Mount Rear Derailleur
Wolf Tooth Components Lindarets GoatLink Shimano Direct Mount Rear Derailleur - Improves chain wrap and reduces premature shifting degradation by replacing the direct mount link from compatible shimano ten-speed rear derailleurs. Goatlinks are designed to optimize the derailleur’s position relative to your cassette offered in two versions, a 10-speed and 11-speed, each is intended to improve the shifting of your 1. Does not work with direct mount native frames or sram rear derailleurs. Compatible with 2013 or later shimano 10-speed shadow plus rear derailleurs that use the 8mm direct mount intermediate link whose link is 79, 81mm thick. The fastest route to improved wear and long-term shifting performance on wide-range 1×10 drivetrains that utilize shimano shadow plus derailleurs.

 

Wolf Tooth Components Headset Spacer Kit 3 510 15mm Red
Wolf Tooth Components Headset Spacer Kit 3, 5,10, 15mm, Red
Wolf Tooth Components Headset Spacer Kit 3, 5,10, 15mm, Red - Material aluminum. Thickness 5. Stem clamp diameter 28. Thickness 15. H. Offered in multiple sizes, made proudly in minneapolis, mn, and laser marked with the stack size on each end, find your perfect fit. I. S. Designed and manufactured in the minneapolis, mn usa. 6. Color red. Add some color and style to your bike build with precision headset stack spacers. Fits 1 1/8″ steerers only. Thickness 10. Defined color red. S. Made from 6061-t6 aluminum. Thickness 3.

 

Wolf Tooth Components Drop-Stop Chainring 30T x 94 4-Bolt
Wolf Tooth Components Drop-Stop Chainring: 30T x 94 4-Bolt
Wolf Tooth Components Drop-Stop Chainring: 30T x 94 4-Bolt - Chainring bcd 94. Optimized for use with 10, 11, and 12 speed chains. Features wolf tooth’s drop-stop tooth design for maximum chain retention. Ring position/type chain retaining single ring. Designed to fit 94 bcd 4-bolt cranks such as the sram x1 crank, these rings will provide maximal chain retention and minimal noise. Material aluminum. Tooth count 30. These rings feature the patent pending drop-stop asymmetrical tooth design for the best in wear life, mud clearance, and chain retention. 49mm chainline. Drivetrain speeds 10. Defined color black. Made from 7075 aluminum for long life. Not compatible with 9 speed chains. Color black. Drivetrain speeds 12. Drivetrain speeds 11.

 

Wolf Tooth Components Direct Mount Drop-Stop PowerTrac 34T Chainring For Race Face CINCH Cranksets Black
Wolf Tooth Components Direct Mount Drop-Stop PowerTrac 34T Chainring: For Race Face CINCH Cranksets, Black
Wolf Tooth Components Direct Mount Drop-Stop PowerTrac 34T Chainring: For Race Face CINCH Cranksets, Black - Optimized for use with 10, 11, and 12 speed chains. Not compatible with 9 speed chains. The simplest way to explain the way these rings feel is having 2 teeth less in the weak part of your pedal stroke and 2 teeth more where you have the most power. Drivetrain speeds 10. Features wolf tooth’s drop-stop tooth design for maximum chain retention.